Jailbreak iOS 9.3.3

Not Happy with Semi-Untetherd-Then Unjailbreak iOS 9.3.3

Pangu new jailbreak is now in public hand, but it was quite strange for majority as iOS 9.3.3 jailbreak is a semi-untethered. Even though there were number of updates following its debut, still it is a semi-untethered jailbreak which needs of re-operating the app with each and every reboot. So special care is needed with every operation. By now most of the problems with new Pangu Download are well-sorted, but still it will sound good to know a convenient way to Unjailbreak iOS 9.3.3. Here I try to talk about the best way to get back to stock iOS. therefore read on and know how to remove iOS 9.3.3 jailbreak on your iPhone, iPad or iPod Touch.

unjailbreak iOS 9.3.3

As Pangu 9.3.3 is a semi-untethered your jailbreak will be easily gone with every reboot. So there if you prevent reinstalling you will not find iOS 9.3.3 jailbreak back on your device. Even this can be done easily with its Semi-untethered nature, this isn’t the proper way. So with today’s note I will cover how you could restore through iTunes to unjailbreak iOS 9.3.3 as the accepted way by majority. So follow my guide.

How to Remove your iOS 9.3.3 Jailbreak

You have three ways to unjailbreak iOS 9.3.3. One is the simple reboot on your semi-untethered jailbreak, and Cydia impactor Download is the other in addition to what I am going to reveal through iTunes method. As to my view restoring through iTunes is safe to come back to stock in a acceptable way. So below is the simple guide to unjailbreak iOS 9.3.3 with iTunes restoring.

  • Step 1: Connect your jailbroken iDevice to a PC or Mac (User a proper lightning cable)
  • Step 2: Put your Device into Recovery Mode
  • Step 3: Get into iTunes on your PC or Mac (Make sure you are installed to latest iTunes) and see whether you are getting a prompt like shown below, If so click ” OK”

unjailbreak iOS 9.3.3

  • Step 4: Then Click “Restore” when asked

unjailbreak iOS 9.3.3

  • Step 5: In the next prompt, click on “Restore and Update” to continue

unjailbreak iOS 9.3.3

  • Step 6: Then iTunes will start restoring your iOS. Do not disconnect or interrupt until everything is successfully done

unjailbreak iOS 9.3.3

  • Step 7: Within seconds everything will be successfully over, so now you will see a screen like below which is to inform you have done restoring through iTunes

unjailbreak iOS 9.3.3Within few easy steps you are now restored iOS 9.3.3 successfully. So you can start fresh with stock iOS. If you have had a complete backup of your device’s data prior to getting started with Pangu 9.3.3 jailbreak you can go with screen instructions to restore all your content back.

Even though Pangu 9.3.3 was quite buggy at its early days, Pangu has made it more stable with constant updates. In fact you can now jailbreak iOS 9.3.3 with updated Pangu 1.1 English app with Windows, Mac or Linux support. And by now the main reason which caused a lot to unjailbreak iOS 9.3.3 has also solved giving a 1-year Beijing Enterprise Certificate which prevent your jailbreak getting expired until April 2017. In that way, Pangu 9.3.3 is more user supportive, but if you feel not keeping your jailbreak this is the best way to unjailbreak iOS 9.3.3. So go through our guide and remember to have more visits to know more to what you know about all iOS facts.

Unjailbreak iOS 9.3.3

How to remove Cydia from jailbroken iOS 9.3.3

It’s important to know how to uninstall and unjailbreak iOS 9.3.3 if things went wrong after installed too many or malicious jailbreak tweaks. As you know already PP Pangu can jailbreak iOS 9.3.3 running 64 bit devices. PP Pangu 9.3.3 is a semi untethered jailbreak. Tweaks and apps listed in Cydia appstore is not tested or certified by any reputed service as all apps available in Appstore is completely checked and passed through a quality assurance process by Apple. Therefore there’s a risk of having malicious apps or tweaks in Cydia appstore which may caused for malfunction your device after jailbreak. The best way to get rid of such incidents is to uninstall Cydia completely from your device.

unjailbreak iOS 9.3.3

Benefits on  unjailbreak iOS 9.3.3

  • Completely uninstall Cydia
  • Remove all Cydia tweaks and games
  • Bring your device back to it’s original state
  • You have 3 options to remove Cydia
  • Use Cydia impactor (not supported for iOS 9.3.3)
  • Restore your device using previous backup
  • Restore your device completely

Alternatively your can use Semirestore or iLEX rat for remove tweaks and games without restore but not a perfect way.

Since PP Pangu 9.3.3 is a Semi untethered jailbreak, Cydia will be automatically gone after every reboot. So you can skip reinstalling if you don’t want it back. Further you can remove appropriate profile from your device at Settings > General > Device Management > Profiles to remove PP Pangu 9.3.3 permissions.

Pangu 9.3.3 Released-iOS 9.3.3 Jailbreak Updates

After months of an interval, Pangu has finally dropped a new Pangu tool to jailbreak iOS 9.2-iOS 9.3.3 making the long awaited jailbreak fans happy. And those who waited for Pangu 9.3.3 can now get the new tool help which comes addressing all iOS versions from iOS 9.2 to latest iOS 9.3.3. As of this writing, the tool is only available in Chinese language support and hope pangu will soon release the English version. Therefore, in this piece of writing, we wish cover all related facts on how to jailbreak iOS 9.2 to iOS 9.3.3 with latest Pangu Download. Read on and make sure you are bound to the conditions of this new tool version to get Cydia benefits.

Pangu 9.3.3

New pangu tool version is a Windows-only jailbreak, meaning it only supports Windows PC or Mac running either Bootcamp or a virtual machine Windows. So it is important to be ready with a supported PC. Another thing is Pangu new tool release is not an untethered jailbreak, which means a hybrid version between both tethered and untethered where you have to re-jailbreak everytime you reboot your device. In simply, new Pangu download version is a semi-untetehred jailbreak.

Pangu Download- Device Compatibility

Before getting started with new tool, you need to check the device compatibility, and this jailbreak version only supports 64-bit iOS devices at the current state. In that way, iPhone 5 has dropped from the compatibility list.

  • iPhone 5s
  • iPhone 6, iPhone 6 Plus, iPhone 6s and iPhone 6s Plus
  • iPhone SE
  • iPod touch 6G
  • iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2
  • iPad Pro

Pangu Download- Jailbreak Guide

If you are with a supported device model, you can follow our simple guide for a successful pangu 9.2-9.3.3 jailbreak.

Preparations for the Process:

  • Make a complete backup of the device’s data prior to processing as system level changes might effect the device’s content
  • Turn off Find My iPhone and to temporarily disable the passcode from the device’s settings
  • As new Pangu version is a windows-only jailbreak, be ready with a Windows PC or Mac with either Bootcamp or a virtual machine running Windows
  • Have a proper USB cable that matches your iDevice model
  • Make sure your computer has installed latest iTunes version, if not make the relevant changes prior to proceed
  • Make sure to have a stable internet connection and sufficient battery strength on your iDevice (At least about 50-60%)

Please Note: If you wish to proceed with new Pangu jailbreak version, please udate your device to iOS 9.3.3 as it is the latest iOS version that includes fixes and security improvements, so download iOS 9.3.3 on your iDevice if you have not yet installed

Step By Step Guide

  • Step 1: Download Pangu installer on your PC, Click below

Pangu Download

  • Step 2: To run as Administrator, right click on the downloaded file and click “Run as Administrator”

Pangu download

  • Step 3: when Windows asked to trust the publisher, click on “Yes” to continue and you also have to click on “Trust” the connection when asked to trust the app for Windows firewall

Pangu Download

  • Step 4: When you launch the interface, you have to click on the button appears in the UI to download and install Pangu jailbreak tool

install pangu jailbreak tool

  • Step 5: When finished you will see a new icon in your Home screen and at the same time you will have to connect your iPhone, iPad or iPod touch with the USB cable you have prepared. Then right-click on the Pangu icon and select “Run as administrator” to continue. And you have to click on “Yes” in the interface you get next like shown below

pangu Download

  • Step 6: Then the tool interface will open and let it detect your iDevice
  • Step 7: If it is successfully done, click on the green button to proceed

Pangu Jailbreak

  • Step 8: In a few minutes, you will be asked for the Apple ID, there you have to enter the particulars and click on the green button to log in

Pangu download

  • Step 9: In few seconds, you will be notified the Pangu on your iDevice’s Home screen and then head to device’s Settings and direct to General > Device Management

Pangu Download

  • Step 10: Then you have to tap on the next profile appears to click on the blue “Trust button” with your email address
  • Step 11: In the pop-up prompt you get by then tap on the red “Trust button” and go to the Home screen as you trusted the profile successfully
  • Step 12: Then launch Pangu/PP app from your Home screen (Allow push notifications by clicking “OK”)

Pangu Download

  • Step 13: After that you have to click on the circle comes in the next interface. As it turned into a text line you have to lock your device and a notification will be received
  • Step 14: In few seconds you would probably be informed that your device’s storage is getting full and that is normally expeceted in the process. So you have to unlock your device and re-launch the Pangu/PP app. There you will notice it trying installing Cydia on your iDevice
  • Step 15: After few minutes later, your device will automatically reboot, then you will be able to see Cydia successfully installed in your Device’s Home screen

installing Cydia

That is all you have to follow and now you have successfully jailbroken your iOS 9.3.3 with newest Pangu 9.3.3 guide. You can now launch Cydia but have to wait as Cydia will take some minutes to prepare the system files.

Troubleshooting

You will hardly encounter difficulties, if you follow the given guide properly. So proceed with caution and try several times if you failed attempting. Make sure you are prepared with given instructions for a successfull iOS 9.3.3 jailbreak without interruptions.

It seems bit differ to the usual untethered jailbreak we have often seen, in fact it is lengthtier. So if you follow with caution you will be able to install Cydia on iOS 9.3.3.

Cydia has updated with best additions for 2016, and now you can enjoy all best Cydia apps and tweaks in your iOS 9.3.3 which has successfully jailbroken by Pangu 9.3.3 guide. There may be tweaks that are not still compatible for iOS 9.3.3, so before stat downloading check whether that particular tweak is suppported or not for iOS 9.3.3. So enjoy Cydia 9.3.3 with latest pangu download and do not forget to tell us your experience too.